Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU314C-2ptp as Modbus master or Slave possibility Through Ptp port

Created by: Titas at: 7/16/2008 9:00 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/16/2008 9:00 AM	Rate (0)
Titas Posts: 94 Rating: (15)	Dear Friends, Can you confirm me wheather CPU 314C-2ptp canconfigure as a modbus master or slave without useing any CP341 card through ptp port? Regards :- Titas
Titas Posts: 94 Rating: (15)
Suggestion To thank Quote Answer

7/16/2008 9:28 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/20/2024 Posts: 8786 Rating: (1172)	Hello Titas, When you have CPU314C-2PtP, you can use point to point interface for following protocols: 3964(R), ASCII and RK512. It is not possible to use loadable drivers (Modbus). When you want to use Modbus you will have to use CP341 Best regards, Wizard

Suggestion To thank Quote Answer

5/18/2014 9:43 PM	Rate (0)
Blue Moderator Platinum Member Joined: 4/21/2006 Last visit: 12/20/2024 Posts: 510 Rating: (24)	New question was splitted to a new thread: Write Modbus Driver using SCL lenguage?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on