Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
3 Entries
| 1/14/2009 5:01 AM | |
Joined: 9/27/2006 Last visit: 11/11/2024 Posts: 12293 Rating:
|
Hello Corben; The following attachment explains how the counting function reacts when the count reaches the configured end limit. The manual is available here: http://support.automation.siemens.com/WW/view/en/12429336 Hope this helps, Daniel Chartier |
Last edited by: dchartier at: 1/14/2009 5:03 AM |
|
| 1/15/2009 3:51 AM | |
Joined: 1/14/2009 Last visit: 7/19/2024 Posts: 19 Rating:
|
I see, thank you. |
Follow us on