Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

create positioner with s7 1200 and V20 analog input

Created by: toni66 at: 11/30/2023 6:36 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

11/30/2023 6:36 PM	Rate (0)
toni66 Regular Member Joined: 3/17/2017 Last visit: 7/26/2024 Posts: 13 Rating: (0)	good morning, I need to create a positioner for a shear with CPU S7 1200 ac/dc/rly fw 4.1 (signal boards 0-10V), 600P/R encoder, Hmi KTP400 and V20. I have difficulty in realizing the rotation reversal of the motor with V20 analog signal. Can anyone help me realize my project. Thank you

Suggestion To thank Quote Answer

12/1/2023 4:14 AM	Rate (0)
qwazee Platinum Member Joined: 3/30/2020 Last visit: 11/8/2024 Posts: 4938 Rating: (1010)	toni66 good morning, I need to create a positioner for a shear with CPU S7 1200 ac/dc/rly fw 4.1 (signal boards 0-10V), 600P/R encoder, Hmi KTP400 and V20. I have difficulty in realizing the rotation reversal of the motor with V20 analog signal. Can anyone help me realize my project. Thank you Have a look at the following FAQ which will help you to realize forward / reverse analog commands. Using the MC-PreServo and MC-PostServo organization blocks
	Activities of this user is voluntary. There is no obligation or liability placed on this user. Though optional, your 'please' and 'thank you' is highly valued.
Suggestion To thank Quote Answer

12/1/2023 6:16 AM	Rate (0)
Mr.V Silver Member Joined: 6/19/2019 Last visit: 10/29/2024 Posts: 705 Rating: (76)	If you have free DO on your controller, and free DI in your V20 then you can enter parameter on your V20 [ function of digital input ** ] and there set parameter 12 Reverse, then you do logic in your PLC then need go reverse trigger that DO which turn on V20 reverse function.

Suggestion To thank Quote Answer

12/1/2023 12:30 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello, it is described in the manual. 2.2 PROFIdrive drive /analog drive connection https://support.industry.siemens.com/cs/ww/en/view/109773400
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

12/1/2023 4:00 PM	Rate (0)
toni66 Regular Member Joined: 3/17/2017 Last visit: 7/26/2024 Posts: 13 Rating: (0)	THANK YOU ALL

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users qwazee

|

Share this page:

Share this page on...

Follow us on