Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Data block - Can't set offsets

Created by: Kile at: 4/3/2014 12:46 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/3/2014 12:46 PM	Rate (0)
Kile Posts: 9 Rating: (0)	Hi When I create a global DB in TIAv12 I can not select 300/400 compatiable. But I can go to properties after I created it and unselect optimized which will make the offsets column appear. But, I can not edit the offsets. Is this possible to activate? How can I skip from 4.2 to 5.0 instead of having to go thorugh 4.3 to 4.7? Attachment 8.jpg (454 Downloads)
Kile Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

4/3/2014 12:51 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/23/2024 Posts: 15531 Rating: (2461)	Kile Hi When I create a global DB in TIAv12 I can not select 300/400 compatiable. But I can go to properties after I created it and unselect optimized which will make the offsets column appear. But, I can not edit the offsets. Is this possible to activate? How can I skip from 4.2 to 5.0 instead of having to go thorugh 4.3 to 4.7? I just add sparebit42..sparebit47. The next spot is then 5.0
	science guy
Suggestion To thank Quote Answer

4/3/2014 2:23 PM	Rate (0)
Kile Posts: 9 Rating: (0)	Ok, I am now padding. But I have trouble getting aligned anyway. I get shifted 1 Byte forward then I want to be. See attached image. What's wrong here? Attachment 9.jpg (525 Downloads)
Kile Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

4/3/2014 2:34 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/23/2024 Posts: 15531 Rating: (2461)	Word boundaries are even numbers.
	science guy
Suggestion To thank Quote Answer

4/3/2014 2:34 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/20/2024 Posts: 8786 Rating: (1172)	Hello Kile, A Word is Two bytes. (so Dataword 12 consist of Databyte 12 and Databyte 13, first free address will be 14.) And a Word will start with an Even address. Best regards, Wizard
	Last edited by: Wizard at: 4/3/2014 2:35 PM huggy_d1 was faster ;-))
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on