Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

DATA IS NOT COMING FROM PAC3200 VIA ET200S

Created by: AutoGen_418847 at: 12/20/2012 9:46 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/20/2012 9:46 AM	Rate (0)
AutoGen_418847 Posts: 4 Rating: (0)	Sir, We are trying to fetch data from a pac meter through IM 151-8 using modbus tcp ip protocol. Following every procedure given in manual, we are getting an error & SF LED flashes. w.r.t. the error manual says that we have to send this IDENT_CODE to IT4Industry SOFTWARE REGISTRATION FORM. I am attaching a few screenshots of status and IDENT_CODE.In pdf please check page no. 24 & 53. PAC meter Details: MODEL: SENTRON PAC3200 Serial: QAE 2811 MLFB NO.: 7KM2112-0BA00-3AA0 CPU DETAILS.: CPU: IM151-8 PN/DP CPU MLFB: 6ES7 151-8AB01-0AB0 Attachment status.JPG (272 Downloads)
AutoGen_418847 Posts: 4 Rating: (0)
Suggestion To thank

12/20/2012 10:57 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/19/2024 Posts: 4114 Rating: (195)	closed cause question posted more than once. The other thread with the subject Data is not coming from pac3200 with ET200Scould be found within the conference OpenModbusTCP Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

ModbusTCP

Follow us on