Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Data Logging with S7-1200

Created by: Aristotelis at: 7/15/2009 7:10 PM (15 Replies)

Rating (1)

Thanks 2

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

5/12/2011 1:33 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, A very simple example could be found in https://www.automation.siemens.com/BR/tf/WW/en/Posts/57715#279240
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

1/7/2014 1:27 PM	Rate (0)
Obelix75 Posts: 2 Rating: (0)	Hello, i have a 1214c with a 4MB memorycard and i wrote a datalogger as shown in the system maual (04/2012). most of it works but the 'datalog new file' doesn't seem to work and i don't know what's wrong. pls help
Obelix75 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/9/2014 10:24 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, is there any clue in error/status block information?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

6/30/2014 6:36 PM	Rate (0)
Hamed shamam Posts: 6 Rating: (0)	I have used the example of the data log creation , it works okay, but if when I recycle the power or the PLC go stop and run it gave an error 8093, so I have to delete the CVS file from the web server, then recycle the power or use stop run function to resume. I have done this example in TIA V11 and V12. what you recommend to avoid the 8093 error?
Hamed shamam Posts: 6 Rating: (0)	Last edited by: Hamed shamam at: 6/30/2014 6:48 PM
Suggestion To thank Quote Answer

6/30/2014 10:37 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/19/2024 Posts: 15406 Rating: (2446)	Hamed shamam I have used the example of the data log creation , it works okay, but if when I recycle the power or the PLC go stop and run it gave an error 8093, so I have to delete the CVS file from the web server, then recycle the power or use stop run function to resume. I have done this example in TIA V11 and V12. what you recommend to avoid the 8093 error? Maybe this link will help: /tf/WW/en/Posts/89251
	science guy
Suggestion To thank Quote Answer

7/7/2014 7:10 PM	Rate (0)
Hamed shamam Posts: 6 Rating: (0)	It does not help because the example is forSIMATIC S7-1500, and I am using S7 1200
Hamed shamam Posts: 6 Rating: (0)	Last edited by: Hamed shamam at: 7/7/2014 7:11 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on