Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Details of the 'INFO' on the faceplate

Created by: jimshad at: 9/26/2013 6:24 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/26/2013 6:24 PM	Rate (0)
jimshad Posts: 30 Rating: (0)	Hi I am working with CEMAT based PCS7. I would like to add the details of MCC for the motors (Eg: Bulding,location,Rack etc.) on the provision given under the tab 'INFO'. How we can enter the details Thanks& Regards Jimshad
jimshad Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

9/30/2013 12:59 PM	Rate (0)
jumo Bronze Member Joined: 11/16/2012 Last visit: 3/22/2024 Posts: 227 Rating: (31)	Hi jimshad, check if you have the right authorization ("Modify Info Dialogue").With this authorizationtheMCC DATA fields are writeable. Regards

Suggestion To thank Quote Answer

9/30/2013 3:25 PM	Rate (0)
jimshad Posts: 30 Rating: (0)	Hi That option is enabled only. The problem is when I entered the datas it is not saving. Jimshad
jimshad Posts: 30 Rating: (0)	Last edited by: jimshad at: 9/30/2013 3:26 PM
Suggestion To thank Quote Answer

9/30/2013 3:47 PM	Rate (0)
jumo Bronze Member Joined: 11/16/2012 Last visit: 3/22/2024 Posts: 227 Rating: (31)	Hi jimshad, try this: Go to User Archive in WinCC Explorer. Select the Button "Runtime DATA" and then select "C_INFO". In "C_INFO" you have to fill anything in the first row. See attached picture. After that it should work! regards Attachment CEMAT_INFO_DATA.jpg (74 Downloads)

Suggestion To thank Quote Answer

10/1/2013 5:42 PM	Rate (0)
jimshad Posts: 30 Rating: (0)	Hi Jumo..... It works......Thxs..... Jimshad
jimshad Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on