Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Digital Output Card Response Time

Created by: Import-User-1 at: 8/29/2005 3:54 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/29/2005 3:54 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	How does Siemens define response time for digital output cards? Is it the same as switch rate? How does Siemens measure this?
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

8/29/2005 3:55 PM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	The response time is the time between the detection of an input signal and the change of a linked output signal. The response time depends on the cycle time and following factors: •Delay of the inputs and outputs of signal modules or integrated I/O. •Additional update times for PROFINET IO •additional DP cycle times on PROFIBUS DP •Execution in the user program (2 times the CPU cycle time!) The delay times (switch times) are located in the specifications of the signal modules If you need more details please contact the customer support! Best regards Simatic Customer Support

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on