Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Display Current user that is logon

Created by: Reymond at: 6/13/2008 4:52 AM (5 Replies)

Rating (1)

Thanks 1

6 Entries

6/13/2008 4:52 AM	Rate (0)
Reymond Posts: 112 Rating: (0)	Hi, Good morning, I just want to know if there's a way on how to display the current user on winccflex? Thank you very much in advance, Thanks, Begginer
Reymond Posts: 112 Rating: (0)
Suggestion To thank Quote Answer

6/13/2008 2:46 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/29/2023 Posts: 8593 Rating: (1132)	Hello Begginer, Perhaps this thread is useful: /tf/WW/en/Posts/7653 Best regards, Wizard

Suggestion To thank Quote Answer

4/22/2010 5:17 PM	Rate (0)
nookamon Posts: 8 Rating: (0)	How I show it in boolean? I want only bit.
nookamon Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/22/2010 8:10 PM	Rate (1)
ChrisB_isi Posts: 7 Rating: (4)	Use scheduler, event (Change user) and run the following script: Dim user, Password, User_name Password = "default" 'Password for default user User_name = "No User" 'Username for default user GetUserName user 'Read User name from system If user <> "No User" Then ' If someone is logged in, tell PLC ResetBit SmartTags("System\LOGIN_NotLoggedIn") End If If user = "" Then ' If no user is logged in, then log on "No User" Logon Password,User_name ' Logon(Password,User name) SetBit SmartTags("System\LOGIN_NotLoggedIn") ' Tell PLC nobody is logged in End If This will get your user and set bit when someone is logged on. Not sure what was meant about only wanting 1 bit to represent the user. Hope this helps.
ChrisB_isi Posts: 7 Rating: (4)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users NikK

4/30/2010 10:44 AM	Rate (0)
nookamon Posts: 8 Rating: (0)	Thank you.
nookamon Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

1/2/2020 3:15 AM	Rate (0)
Didier.Hernandez Posts: 1 Rating: (0)	I tried your script but it won't compile. There's an error on the script. This part -> ("LOGIN_NotLoggedIn") seems to be the issue. Im using winCC Flexible 2008.
Didier.Hernandez Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on