Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

display login and logout status of user in wincc 8.0 alarms

Created by: Mohit P at: 10/8/2024 5:24 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/8/2024 5:24 AM	Rate (0)
Mohit P Joined: 5/12/2024 Last visit: 11/9/2024 Posts: 3 Rating: (0)	Hello Sir, Your project are not migrated to wincc 8.0, i am using wincc 8.0 and i want to display login and logout status of user in wincc alarms also acess denied message for user. Please help. ------------------------------------------------------------------------------------------ Split from Track users' activities.
	Last edited by: Moderator_Lan at: 10/08/2024 07:08:18 New subject after splitting
Suggestion To thank Quote Answer

10/9/2024 10:22 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/15/2024 Posts: 14176 Rating: (1774)	Hello you can use the @CurrentUser as Trigger for a Script. Check in The script if the tag is empty (there was a logout) and if there is a username in it there was a login. Then you can execute a operator message to have this information in the Alarm logging (if you want to have this automatic you have to use WinCC Audit) Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on