Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Display of System constants in the hardware configuration using V12

Created by: Tomy Master at: 4/10/2014 9:45 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/10/2014 9:45 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/23/2024 Posts: 914 Rating: (40)	That is really v. good feature for TIA 13, But what we can do to show system constants when working with V12 Regards. Tomy
	Last edited by: CS Moderator at: 4/12/2014 7:21 AM new subject after splitting from /tf/WW/en/Posts/106260#top Aim Higher
Suggestion To thank Quote Answer

4/30/2014 2:32 PM	Rate (0)
D_Craig Member Joined: 11/28/2013 Last visit: 9/11/2024 Posts: 10 Rating: (0)	Hi Tomy, in TIA V12 you find the system constants under "Default tag table" in the tab "System constants"

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on