11/30/2009 5:01 PM | |
Joined: 9/27/2006 Last visit: 8/31/2024 Posts: 12282 Rating:
|
Hello Navnag; I believe you are right, in that there is presently no direct provision for DNP3 in the Siemens catalog (please, correct me if I am wrong). I heard about Industrial IT providing solutions for some of the substation IEC protocols, but I haven"t found anything for DNP3. Here is a DNP3 primer that I downloaded some time ago from the DNP User's Group, still a good place to look for the latest information on DNP3: http://www.dnp.org/About/UsersGroup.aspx Hope this helps, Daniel Chartier Attachmentdnp3_primer.pdf (526 Downloads) |
11/30/2009 7:23 PM | |
Joined: 9/27/2006 Last visit: 8/31/2024 Posts: 12282 Rating:
|
Hello Navnag; I"m glad that the document proposed could give you at least basic infp on the DNP3 protocol. The site link I mentionned earlier allows downloads of many technical documents that should give you a complete decription of the implementation of the protocol. Look for example here: http://www.dnp.org/Modules/Library/Default.aspx?CategoryID=3 You will also find application notes and descriptioon of various software tools that could help you out. Just roam on the DNP site. Hope this helps, Daniel Chartier |
This contribution was helpful to
1 thankful Users |
12/1/2009 7:17 AM | |
Joined: 10/7/2005 Last visit: 9/1/2024 Posts: 3018 Rating:
|
Hello Navnag it won't help you at the moment but a reliable source told me that a DNP3 capable comms card willbe developed for the S7-1200 (tentative relase date is by the end of 2010). Who knows, perhapsSiemens will also develop a DNP3 CP for the 300 and/or 400 (one can only hope, the demand is there for it as far as I'm concenred). |
Cheers |
|
12/1/2009 11:55 PM | |
Joined: 10/7/2005 Last visit: 9/1/2024 Posts: 3018 Rating:
|
Iunfortunately have no idea wahtsoever concenring this dearNavnag, but DNP3 is also very popular here in Australia. Who knows, since X-Mas is the time for miracles and considering that we all have been "good kids" perhaps Siemens could put a DNP3 CP into our stocking this year |
Cheers |
|
2/2/2011 4:03 PM | |
Joined: 10/9/2007 Last visit: 8/7/2024 Posts: 1248 Rating:
|
Hi Santa Claus married and now is too busy to bring everything https://www.automation.siemens.com/mcms/human-machine-interface/en/visualization- software/scada/wincc-options/wincc-telecontrol/Pages/Default.aspx Mike |
Energy Automation products: Sicam, Siprotec, Digsi |
|
This contribution was helpful to
1 thankful Users |
6/21/2011 5:19 PM | |
Posts: 6 Rating:
|
The DNP3 TIMs are out for S7-300, S7-400 and S7-400H Check: http://support.automation.siemens.com/US/view/en/46635650/133200 http://support.automation.siemens.com/US/view/en/46636298/133200 |
This contribution was helpful to
1 thankful Users |
Follow us on