Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Drawing tools

Created by: ShahinM at: 5/14/2009 11:24 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

5/14/2009 11:24 AM	Rate (0)
ShahinM Silver Member Joined: 11/8/2005 Last visit: 6/5/2024 Posts: 335 Rating: (3)	Is there any drawing tools which I can draw network of PLCs(schematic of PLC)with computer and ... for sales proposal?You can find a lot of that in CA01,but I want to draw it according to my project.

Suggestion To thank Quote Answer

5/17/2009 2:01 PM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 9/9/2024 Posts: 4515 Rating: (839)	Hello, While I am in the sales / quotation phase, I make the project configuration on a Microsoft Power Point slide and present it to my client. I get the image of each item and create the configuration my self. Another way, is to put it on the Net Pro but I think the output of the power point would be better. Regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

5/18/2009 6:59 AM	Rate (0)
ShahinM Silver Member Joined: 11/8/2005 Last visit: 6/5/2024 Posts: 335 Rating: (3)	Dear Ayman, From where you can get the image of each item?

Suggestion To thank Quote Answer

5/18/2009 7:49 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 9/9/2024 Posts: 4515 Rating: (839)	Hello SM, Please check the image database of Siemens. I am sure it will meet your requirements. Regards,
	Last edited by: Ayman Elotaify at: 5/18/2009 7:51 AM Ayman Elotaify
Suggestion To thank Quote Answer

5/18/2009 8:28 AM	Rate (0)
ShahinM Silver Member Joined: 11/8/2005 Last visit: 6/5/2024 Posts: 335 Rating: (3)	Dear Ayman, Thank you for your help.If I need more "configuration graphic" as it has,what should I do?

Suggestion To thank Quote Answer

5/18/2009 9:03 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 9/9/2024 Posts: 4515 Rating: (839)	Dear SM, In my previous reply, you will found a database for many pictures and symbolic pictures for Siemens A&D products. I think it coveres most of them. To make a configuration using these images, you have to use -for instance- Microsoft power point and insert in it what you want from the image database and link them as per your configuration and then you have it. Regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on