Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Drift in 802D sl

Created by: Nanu_333 at: 12/25/2012 8:06 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

12/25/2012 8:06 AM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 8/22/2023 Posts: 196 Rating: (5)	Dear Expert , I am commisiioning 802D sl with ADI4,I am facing axis contour monitoring problem for Z axis. I have aadjusted gain parameter but still the problem persistes. Also please let me know in 802Dsl with ADi4 how auto drift compensation works. regards, chetan

Suggestion To thank Quote Answer

1/3/2013 9:13 PM	Rate (0)
canoworries Posts: 14 Rating: (0)	Happy New Year Nanu Is this a vertical or horizontal axis? What is your application? Which parameter for gain are you referring to? What do you mean by auto compensation? Are you not experiencing drift on the other machine axes? More information would be helpful.
canoworries Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

1/4/2013 11:57 AM	Rate (0)
lules Posts: 5 Rating: (0)	I don't think this is a drift problem. Make sure that the axis is moving with the correct velocity . Check MD32250 RATED_OUTVAL and MD32260 RATED_VELO
lules Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/6/2013 7:28 AM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 8/22/2023 Posts: 196 Rating: (5)	thanks for the reply, I adjusted analog drive solve the problem.it was vertical axis.. If reply to M19 possitioning means how to do M19 in 802Dsl is apprciated. Thanks.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

|

Share this page:

Share this page on...

Follow us on