Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Editor for plc files from PLCbackup.arc

Created by: petek13 at: 9/12/2008 2:16 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/12/2008 2:16 PM	Rate (0)
petek13 Posts: 16 Rating: (0)	Does anyone know, which program opens files that are in backup archive PLC.arc? I opened thebackup file with sinucom ARC, but then ican't open individual files. Thank you in advance.
petek13 Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

9/12/2008 3:14 PM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 5/25/2023 Posts: 967 Rating: (58)	Hi, Your plc.arc is just a dump of the plc. All will you will see are a load of hex numbers which only make sense when reloaded into the control. If you want to see the plc programs you must take a copy online with S7 programming package.

Suggestion To thank Quote Answer

9/12/2008 4:58 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 12/20/2022 Posts: 1502 Rating: (176)	Aktual Version from SinuCom ARC is 2.x ! Which version do you have ? >I opened thebackup file with sinucom ARC, but then ican't open individual files. Binary-File you can NOT open. Textfle it works. you can Edit with your own Editor .def, .mpf, *.spf . . .
	Karl
Suggestion To thank Quote Answer

9/16/2008 2:40 PM	Rate (0)
petek13 Posts: 16 Rating: (0)	SinucomARC is version 01.02.04, then it is to old? It was bought this year. I tried to open them with notepad and wordpad, but no success.
petek13 Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

9/16/2008 3:03 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 5/29/2023 Posts: 586 Rating: (64)	Hi. Look menu "View"-"Option" Archive PLC is binary. Successes. Attachment Option SinuComARC.GIF (534 Downloads)
	Last edited by: pfuser at: 9/16/2008 3:08 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on