Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

EPS INSTALLATION INFO

Created by: sandeep reddy at: 7/26/2010 1:29 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/26/2010 1:29 PM	Rate (0)
sandeep reddy Posts: 92 Rating: (7)	dear all, i have installed EPS on my pcu, i want to create user name and password for the same. how i have to do the same. please help. attached the pic of pcu after eps installation and click on line services i get this screen and unable to move further. Attachment eps login.JPG (101 Downloads)
sandeep reddy Posts: 92 Rating: (7)
Suggestion To thank Quote Answer

7/27/2010 10:03 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello Sandeep Reddy, >Press the "ePS Network" softkey on the HMI. >Press the "Online Services" softkey. >Enter the user name, password and organization name and confirm your inputs with "OK". >The user is now logged in. you can also find further information regarding user login in 1) EPS network services > EPS Operating manual>Chapter 3 http://www.automation.siemens.com/doconweb/content.asp?item=18175&cd=sinumerik_simodrive_04_2010_e&scope=all 2) EPS network services> EPS Functional Manual> Chapter6 http://www.automation.siemens.com/doconweb/content.asp?item=18334&cd=sinumerik_simodrive_04_2010_e&scope=all check it out.... Best regards,
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on