Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error Message on closing step7-simatic manager

Created by: REINE at: 2/3/2011 1:06 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/3/2011 1:06 PM	Rate (0)
REINE Posts: 34 Rating: (0)	hi whenever i close the STEP-7 Simatic Manager, the following error message is comming. The instruction at "0x07502ee6" referenced memory at "0x042d20e8". The memory could not be "read". Click on OK to terminate the program. for more reference, also find the attachment for the same. is there any one who know, how to reslove it?? Attachment S7tptopx.exe-Application Error.JPG (50 Downloads)
REINE Posts: 34 Rating: (0)	Last edited by: REINE at: 2/3/2011 1:09 PM
Suggestion To thank Quote Answer

2/4/2011 10:49 AM	Rate (0)
Azteke0110 Posts: 376 Rating: (57)	Hello Reine, I have looked into your file attachment. Unfortunately, you not write which STEP 7 version and which windows operating system doyou use. Independently of it please look into the following FAQ.Perhaps this FAQ helps you to solve the problem. Here the link: http://support.automation.siemens.com/WW/view/en/26595826 Title: Why does the message "S7tgtopx.exe has caused an error and will be closed" appear? Good luck! Regards Gucci
Azteke0110 Posts: 376 Rating: (57)
Suggestion To thank Quote Answer

2/28/2012 4:44 PM	Rate (0)
AlbertoM Member Joined: 9/7/2009 Last visit: 11/2/2023 Posts: 4 Rating: (0)	I have the same problem, but when trying to open a project. I have one big folder with all my projects. when trying to browse the folder to open a project, the manager crashes. can this be related to folder permissions? or what?

Suggestion To thank Quote Answer

2/28/2012 9:22 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/14/2023 Posts: 10222 Rating: (1177)	Hello, What is its behavior if you tried to open another project, placed in different path? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on