Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Event id 16#2522

Created by: Kauppp at: 4/3/2008 7:21 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/3/2008 7:21 AM	Rate (0)
Kauppp Posts: 15 Rating: (0)	I'm getting intrernal failure and these two errors in diagnostic buffer, when put my CPU to run-mode. Event ID 16#2522 and 16#2523. Both are caused by FC766. This FC-block is generated by PCS7, and I don't know how I can solve this problem. I think something is missing from the project, but how can I find out what? The program compiles and downloads without any error. I'm using PCS7 v5.2 with Pulp&Paper -package v7_09. All the help is appreciated Best Regards Kauppp
Kauppp Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

4/3/2008 10:13 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, FCs > 600 are user FCs. So, maybe your Pulp & Paper package ist corrupt. Ask the deliverer of the package, if he knows the problem. Maybe the following FAQ can give an suggestion http://support.automation.siemens.com/WW/view/en/22236049
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

6/13/2011 12:03 PM	Rate (0)
R J Bronze Member Joined: 10/20/2009 Last visit: 4/3/2017 Posts: 215 Rating: (12)	Hi April, The link which you have provided is expired. Can you send me the new link? I am getting same event ID 16#2522 while doing the Modbus Master slave communication in FB7.
	Regards, R J =================================== Your ‘I CAN’ is more important than your ‘I.Q’
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on