Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Faceplate

Created by: Per Olof at: 9/19/2013 12:28 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

9/19/2013 12:28 PM	Rate (0)
Per Olof Posts: 311 Rating: (3)	Hi, I try to configure a faceplate but I do not manage. I do not understand why the Events does not appaer in the Event list of the faceplate (see picture). Does anybody got an example of a faceplate for TIA WinCC V12 Professional ? Per Attachment faceplate.jpg (304 Downloads)
Per Olof Posts: 311 Rating: (3)
Suggestion To thank Quote Answer

9/19/2013 1:10 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Have a look in these links. http://support.automation.siemens.com/WW/view/en/78380998 http://support.automation.siemens.com/WW/view/en/67318600 Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

9/19/2013 3:52 PM	Rate (0)
Per Olof Posts: 311 Rating: (3)	I found the reason, if you declare the click event in the faceplate the click_1 event is not called! Thanks
Per Olof Posts: 311 Rating: (3)	Last edited by: Per Olof at: 9/19/2013 7:57 PM Last edited by: Per Olof at: 9/19/2013 5:01 PM Last edited by: Per Olof at: 9/19/2013 4:18 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users O_Moderator

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Prof Picture Controls

Follow us on