Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
3 Entries
| 7/27/2020 8:36 PM | |
|
Posts: 3 Rating:
|
Hi All, I have just started to program a logo (24RCE0 without display). I wanted to connect it to my laptop by a lane cable. when I go to tool menue and want to add the logo it asks for IP ad and I entered the default 198.168.0.1 and a few other random one , but it cannot detect my logo? any one here can help how can I find the IP adress of a logo which doesnot have display?? I connected it directly to laptop by nomal ethernet cable. Many Thanks Nas ------------------------------------------------------------------------------------------ |
Last edited by: Autojhon at: 07/27/2020 20:38:21Last edited by: Jen_Moderator at: 07/28/2020 06:46:06New subject after splitting |
|
| 7/27/2020 8:40 PM | |
Joined: 12/18/2014 Last visit: 11/12/2024 Posts: 34206 Rating:
|
Hello Autojhon, please don't post twice or more for the same problem. You also post in this topic (11th reply): https://support.industry.siemens.com/tf/ww/en/posts/logo-8/115339/?page=1&pageSize=10#post948286 |
| 7/28/2020 6:47 AM | |
Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating:
|
|
Follow us on