Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

firmware S7-1200

Created by: alias11 at: 4/28/2015 11:48 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/28/2015 11:48 AM	Rate (0)
alias11 Posts: 8 Rating: (0)	Hi i installed firmware 2.2 for S7-1214C AC\DC\RLY 214-1BE30-0XB0 using a memory card but in the end the Error LED still flash. And the plc still don't work. What can i do?
alias11 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/28/2015 12:29 PM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	Hello, have you remove the Memory Card and power off/on the PLC agauin? Regards Christoph

Suggestion To thank Quote Answer

4/28/2015 3:02 PM	Rate (0)
alias11 Posts: 8 Rating: (0)	hi yes i did that
alias11 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/28/2015 11:01 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 3/20/2023 Posts: 13192 Rating: (2146)	Did you go online with the PLC afterwards and view the diagnostics buffer to see what is wrong? alias11 hi yes i did that
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on