Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Firmware Update

Created by: AutoGen_5813946 at: 1/11/2018 12:01 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

1/11/2018 12:01 PM	Rate (0)
AutoGen_5813946 Posts: 6 Rating: (0)	Could anyone help me with an issue? I am trying to update the firmware by dragging the CPU device to the one already existente and it is not allowing me. The CPU model is S7-1200 1214C DC/DC/DC. Could anyone indicate what I might be doing wrong? Attachment CPU1214C.png (30 Downloads)
AutoGen_5813946 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/11/2018 12:08 PM	Rate (1)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2819)	Hello, right mouseclick on the device in deviceview -> change device/Version which plc exactly is plugged and which TIA Version is used? Regards Christoph
	Last edited by: ChristophD at: 1/11/2018 12:11:56 PM
Suggestion To thank Quote Answer

1/11/2018 12:51 PM	Rate (0)
AutoGen_5813946 Posts: 6 Rating: (0)	Thank you for the help. It was a change from the v4.2 to 4.1. It worked!
AutoGen_5813946 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users 0_Einstein

|

Share this page:

Share this page on...

Follow us on