Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FIXED FEED OVERRIDE FOR A AXIS

Created by: Balu_M at: 11/27/2010 9:16 AM (1 Replies)

Rating (0)

Thanks 2

2 Entries

11/27/2010 9:16 AM	Rate (0)
Balu_M Posts: 69 Rating: (1)	Hi, I amretrofittingone HMC machine with 840D system, There is 6 axis and one spindle. A axis i am using for magazine, for A axis Feed I do not want to control through Feed override selector switch, fixed feed override bit DB34.dbx3.4 enabled through PLC. and 100 % move to DB34.DBB0 If i close feed override selector switch to 0 position, the A axis not moving, any one have solution please help me. regards, Balaji
Balu_M Posts: 69 Rating: (1)
Suggestion To thank Quote Answer

11/27/2010 11:53 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (474)	Hello.... You need to look in to the General MD parameters too.... > 12200= RUN_Override _0 >12202= Premenent_Feed attaching the pdf of the same for the reference.... Check it out.... Regards, Ekalavya Attachment feedrates.pdf (209 Downloads)
Ekalavya Posts: 2964 Rating: (474)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Balu_M Rajni

|

Share this page:

Share this page on...

Follow us on