Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

flexible modbus

Created by: MAKSOY at: 3/20/2012 12:36 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

3/20/2012 12:36 PM	Rate (0)
MAKSOY Experienced Member Joined: 3/16/2012 Last visit: 5/1/2024 Posts: 34 Rating: (0)	I want to make an application. My system is consists of Carel PCO controller (2 pieces), Hvac unit (2 pieces). The communication protocol of these unit MODBUS. I want to monitor and control them with wincc or wincc flexible. Is it possible for such a thing? How I can be done if something like that. How can I convert Modbus tags to Wincc/Wincc flexible tags? I need your help, best regards.

Suggestion To thank Quote Answer

3/20/2012 1:00 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hi, You can use Modbus protocol with WinCC Flexible. More info about it you can find in this manual SIMATIC HMI WinCC flexible 2008 Communication Part 2 chapter 6.
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Sandman

|

Share this page:

Share this page on...

Follow us on