Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM458-1DP

Created by: Sachin_MEC at: 5/26/2010 9:04 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/26/2010 9:04 AM	Rate (0)
Sachin_MEC Posts: 13 Rating: (0)	Hi I am using FM 458-1DP(6DD1607-0AA2) for my project, when I download hardware configuration, the CPU414-2DP (Order No-6ES7 414-2XK05-0AB0) go to run mode but at the same time FM 458 goes into fault mode and all the LED of FM458 start flashing continuously.While cheking the Diagnostic status online, its shows CPU 414-2DP status Ok & for FM458 its shows "*faulty mode & internal error*". can any one tell me why FM 458 is behaving in this strange way( LED of FM flashing continuosly) ?
Sachin_MEC Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

5/26/2010 10:19 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/11/2024 Posts: 2211 Rating: (280)	Did you download any program to the FM or not? What do you see in the module information of the FM? See also this threadand this.
	Last edited by: KSN at: 5/26/2010 10:43 AM
Suggestion To thank Quote Answer

5/26/2010 3:13 PM	Rate (0)
LA_COLD Posts: 24 Rating: (8)	Try a new MMC card in the FM458 and download the program again. It could also indicate too small of a power supply on the 400 Rack.
LA_COLD Posts: 24 Rating: (8)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on