Graphic dynamization

Greetings community,

I have run into a problem with the scripting and hope you can help me figure out what the problem is.

I have a faceplate on  MTP700 with a "Graphic view" element whose graphic content I want to change depending on the values of my tags (CurrentPage and TotalPage). It's either the script not being executed at all or the syntax is wrong. Tried it in different ways but no luck.

var currentPage = Tags("Statistics.CurrentPage").Read();
var totalPage = Tags("Statistics.TotalPage").Read();
var graphicValue;

if (currentPage < totalPage) {
graphicValue = HMIRuntime.Resources.Graphics("GraphicCollection.ArrowActive_V_0_0_1").Name;
} else {
graphicValue = HMIRuntime.Resources.Graphics("GraphicCollection.ArrowInactive_V_0_0_1").Name;
}

return graphicValue;

rdoliveira

Hello, try to simulate to see if the same thing happens.

The trigger of the script try to put it in 100ms to test

good luck

Hi rdoliveira, and thanks for trying but the difference is that I am trying to implement it in a faceplate. Your simulation, as far as I can see, is on a regular screen.
Tried to assign constant values to currentPage and totalPage same as you did but the result is the same.
By wrong syntax I meant that the faceplate can't access the graphic types from the library for some reason. Don't see anything else that could possible be wrong here.

Fix update:
As suggested, I created a support request and this is the response I got:

Currently there is a misbehavior that the scripts created under "Graphic view -> graphic-> dynamisation" are not triggered.
This behavior is fixed with V18 Updt 2.
Create the script e.g. under other property.

 Hope to get this and many other bugs fixed with the next update.