7/30/2009 8:22 PM | |
Joined: 3/18/2009 Last visit: 5/6/2024 Posts: 306 Rating:
|
The module 6ES7321 1BL80 0AA0 does not support IO redundancy. That's why you don't see the tab redundancy. For a complete list of modules that support redundant IO operation please refer the table 10.2 (pg 137 to 143) inS7400H Fault taulerant system manual. (edition 2/2009)
|
7/31/2009 2:24 PM | |
Joined: 11/8/2006 Last visit: 5/8/2024 Posts: 57 Rating:
|
Thanx for your answer.Now please look at attachment .Now I tried with MODULE mentioned in the manual.Same problem again.I am doing some mistake!But I am not able to find it out. Please have a look and let me know where I am wrong. Regards Ambrish. AttachmentRedundan.zip (296 Downloads) |
7/31/2009 6:50 PM | |
Joined: 7/2/2008 Last visit: 8/26/2024 Posts: 928 Rating:
|
Hello ambrish, I opened yourproject and couldn't configure redundancy for that module. However when I created a new project, I could configure redundancy. It seems to me it's a matter of versions and service packs so I hope you have STEP7 V5.4 with latest service pack. I also find it better to test my configuration on your ES if you already have the latest version and latest service pack. Best regards. H-H AttachmentTest_Red_IO.zip (298 Downloads) |
8/1/2009 6:39 AM | |
Joined: 11/8/2006 Last visit: 5/8/2024 Posts: 57 Rating:
|
Thnaks |
8/1/2009 9:42 AM | |
Joined: 11/8/2006 Last visit: 5/8/2024 Posts: 57 Rating:
|
Can you send any sample project(program) with I/O redundancy? Thanks Ambrish. |
8/3/2009 4:05 PM | |
Joined: 3/18/2009 Last visit: 5/6/2024 Posts: 306 Rating:
|
It's correct. The modules will always have different addresses. However, you have to use only the lower adresses in your program. I don't have a sample program, my be someone will help you with that. I would suggest reading the help of the redundant IO library blocks. They are pretty much what you need to understand and configure IO redundancy. Just couple of quick tips,
|
Last edited by: daga at: 8/3/2009 4:08 PM |
|
Follow us on