Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help topology

Created by: rdoliveira at: 7/1/2013 9:48 PM (25 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

7/1/2013 9:48 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 12/6/2024 Posts: 1565 Rating: (169)	How can I see the topology in CU305? Attachment topol.jpg (274 Downloads)
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/2/2013 2:19 AM	Rate (0)
Ashutosh Kr Bronze Member Joined: 3/15/2011 Last visit: 10/26/2024 Posts: 134 Rating: (9)	goto to the topology > it seems there in a addtional device which you have configured is not present.Ensure that project set,project specfified,project actual are same. regards Ashutosh

Suggestion To thank Quote Answer

7/2/2013 1:27 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 12/6/2024 Posts: 1565 Rating: (169)	Ashutosh Kr goto to the topology > it seems there in a addtional device which you have configured is not present.Ensure that project set,project specfified,project actual are same. regards Ashutosh It's what I want to know if the S110 has no technology option because the warning is asking to verify topology, as I check it?
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/2/2013 1:31 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 12/6/2024 Posts: 1565 Rating: (169)	More an image. Attachment top.jpg (235 Downloads)
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/2/2013 3:13 PM	Rate (0)
DenisMor Posts: 344 Rating: (50)	CU305 has one DriveCLiQ port: x100. Is there anything plugged in to that port? If there is a DriveCliQ motor plugged in to the x100 port, then the SERVO_02 must be configured as a DriveCliQ motor.
DenisMor Posts: 344 Rating: (50)
Suggestion To thank Quote Answer

7/2/2013 5:50 PM	Rate (0)
Ashutosh Kr Bronze Member Joined: 3/15/2011 Last visit: 10/26/2024 Posts: 134 Rating: (9)	As per DenisMor ckeck your drive cliq ports and make sure that it matches your project regards Ashutosh

Suggestion To thank Quote Answer

7/2/2013 9:12 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 12/6/2024 Posts: 1565 Rating: (169)	DenisMor CU305 has one DriveCLiQ port: x100. Is there anything plugged in to that port? If there is a DriveCliQ motor plugged in to the x100 port, then the SERVO_02 must be configured as a DriveCliQ motor. Yes
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/3/2013 8:14 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/5/2024 Posts: 5960 Rating: (820)	Hello rdoliveira, the message A01416 shows that a component with class 4 is additional in your topology and not configured. Component class 4 means a sensor module for motor encoders.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

7/3/2013 12:55 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 12/6/2024 Posts: 1565 Rating: (169)	TechTeam Hello rdoliveira, the message A01416 shows that a component with class 4 is additional in your topology and not configured. Component class 4 means a sensor module for motor encoders. I set a servomotor, but the CU305 does not read the encoder. What can I do?
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/3/2013 1:31 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/5/2024 Posts: 5960 Rating: (820)	Please check your encoder setup, it seems the motor encoder is setup wrong. Maybe you can post your project and the motor order number, and please list the modules (specialy the SMC encoder module) you use.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on