Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help topology

Created by: rdoliveira at: 7/1/2013 9:48 PM (25 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

7/3/2013 7:52 PM	Rate (0)
Ashutosh Kr Bronze Member Joined: 3/15/2011 Last visit: 10/26/2024 Posts: 134 Rating: (9)	just go online with your device and click the button which is shown in the attached file. But before you do that take a back up of your program regards Ashutosh Attachment factoty_reset.zip (166 Downloads)

Suggestion To thank Quote Answer

7/3/2013 8:26 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 12/5/2024 Posts: 1564 Rating: (169)	when I do the factory reset and upload, have the information Information: ------------------------------------------------ ------------------ Information: The following devices are not consistent online:
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/4/2013 4:43 AM	Rate (0)
Ashutosh Kr Bronze Member Joined: 3/15/2011 Last visit: 10/26/2024 Posts: 134 Rating: (9)	try automatic upadate. regards Ashutosh

Suggestion To thank Quote Answer

7/4/2013 1:05 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 12/5/2024 Posts: 1564 Rating: (169)	Ashutosh Kr try automatic upadate. regards Ashutosh how do I do that?
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/4/2013 5:32 PM	Rate (0)
Ashutosh Kr Bronze Member Joined: 3/15/2011 Last visit: 10/26/2024 Posts: 134 Rating: (9)	start the starter > create a new project > search for the accessible nodes > insert the drive unit into the project > read the drive topology via automatic congiguration(below the drive unit) only available online > configure the motor hope this helps regards Ashutosh

Suggestion To thank Quote Answer

7/4/2013 6:48 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 12/5/2024 Posts: 1564 Rating: (169)	After many attempts worked. Thanks to everyone who helped me.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on