Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help with automation in step7 SCL

Created by: lakotnik at: 5/31/2013 10:32 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

5/31/2013 10:32 AM	Rate (0)
lakotnik Posts: 22 Rating: (0)	Hello, I would like to learn more about automation and i need help and advice on how to approach and solve the problem. I would like to automate the blinds, I would like to compare the current date and time to know when to start opening and closing the blind (sunrise time/sunset time). Next thing i have calculated incidence angles of the sun, but now I want to enter this values in a data block or a table and then use them through function or somehow to read them and add value to block the sunrays and with that know how much to turn the motor. I want to learn to do this in the SCL and I could use your help or any advice. I am new in programing with SCL. Thanks for any advice or help.
lakotnik Posts: 22 Rating: (0)	Last edited by: lakotnik at: 5/31/2013 1:47 PM
Suggestion To thank Quote Answer

6/11/2013 5:41 AM	Rate (0)
Shaumi Posts: 28 Rating: (5)	Here is some example of SCL, hope this help SCL best regards, Shaumi Arif
Shaumi Posts: 28 Rating: (5)
Suggestion To thank Quote Answer

6/11/2013 12:33 PM	Rate (0)
lakotnik Posts: 22 Rating: (0)	Thank you :)
lakotnik Posts: 22 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Shaumi

|

Share this page:

Share this page on...

Follow us on