Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Ho w to check module status + HMI status from PLC

Created by: john.kehoe@proflexcon.com at: 5/15/2012 4:42 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/15/2012 4:42 AM	Rate (0)
john.kehoe@profle... Posts: 11 Rating: (0)	Good morning, I have searched in the FAQs and sorry that I do not find it ... From WinCC I can check the CPU status and display on the HMI. I want to do the same thing from thePLC for each IM module and HMI in the system to detect if powered on, no SF LED, etc Then I can use this to post alarms on the HMIs, activate control lights, etc Can you please point me to where on the FAQs I can find this. In case it is important, this project in on a 319-2 PN DP, but I think this information is general to any PLC model in this range. Thanksin advance for your help !! John
john.kehoe@profle... Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

5/15/2012 4:58 AM	Rate (0)
KayBee Posts: 241 Rating: (7)	Here is yourlink,some one already answered in the forum.
KayBee Posts: 241 Rating: (7)
Suggestion To thank Quote Answer

5/15/2012 5:48 PM	Rate (0)
john.kehoe@profle... Posts: 11 Rating: (0)	Thank you
john.kehoe@profle... Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on