Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how can I convert this file to a standart PDB files?

Created by: rzhsz at: 6/5/2009 1:29 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

6/5/2009 1:29 PM	Rate (0)
rzhsz Posts: 8 Rating: (0)	Dear all: We have a old OP25 and we hope to change to new one, but we found that we could not open the original software, what we can find it Protool V4.0 and Protool V6.0, when I open this file, it show that it may be created by COROS Pro Tools V1.X, how can I convert this file to a standart PDB files? Best Regards
rzhsz Posts: 8 Rating: (0)	Last edited by: O_Moderator at: 6/5/2009 1:34 PM new subject after splitting
Suggestion To thank Quote Answer

6/5/2009 2:04 PM	Rate (0)
Manfred Gold Member Joined: 5/28/2008 Last visit: 12/8/2015 Posts: 901 Rating: (136)	Hello I hope this FAQ will help you to solve your problem: http://support.automation.siemens.com/WW/view/en/213253 regards manfred

Suggestion To thank Quote Answer

6/7/2009 9:10 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello Basically if you change this panel to new one, you should start to create new project in Protool or WinCC Flex. By the way this is the fastest and easiest way. Regards Hristo Mihalev

Suggestion To thank Quote Answer

6/9/2009 6:14 PM	Rate (0)
rzhsz Posts: 8 Rating: (0)	I have seen this tips before, but can not understand what shall I do. In the program, the files include: 1996-03-28 17:57 133 BMELD.00L 1998-01-13 16:22 97,913 CANDYNOV.BAK 1998-01-13 16:25 1,390 CANDYNOV.CFG 1998-01-13 16:22 97,913 CANDYNOV.FUD 1998-01-13 16:20 54,784 CANDYNOV.ITM 1998-01-13 16:20 64 CANDYNOV.QV 1997-11-24 11:01 1,477 GLTXT.00L 1997-11-21 17:39 1,576 GLTXT.00T 1997-11-24 11:33 1,554 GLTXT.01L 1997-11-21 17:39 1,553 GLTXT.01T 1994-11-29 10:22 1,394 GLTXT.02L 1994-11-29 10:23 1,371 GLTXT.03L 1994-11-29 14:51 1,380 GLTXT.04L 2009-06-10 00:11 0 list.txt 1994-07-28 01:00 336 PICT0000.PIC 1997-11-20 14:21 3,643 PICT0001.PIC 1994-11-29 10:25 3,814 PICT0002.PIC 1997-11-20 14:04 1,306 PICT0003.PIC 1998-01-09 17:26 1,596 PICT0004.PIC 1998-01-09 17:28 968 PICT0005.PIC 1996-05-03 14:01 2,265 PICT0006.PIC 1997-11-24 12:03 1,843 PICT0007.PIC 1997-11-20 14:20 2,714 PICT0008.PIC 1994-11-23 10:18 2,236 PICT0009.PIC 1998-01-09 17:23 1,942 PICT0010.PIC 1998-01-09 17:22 1,001 PICT0011.PIC 1998-01-09 17:26 932 PICT0012.PIC 1998-01-13 16:20 1,142 PICT0013.PIC 1997-11-20 12:50 927 PICT0014.PIC 1997-11-21 17:04 1,676 PICT0015.PIC 1997-11-21 17:12 830 PICT0016.PIC 1997-11-21 17:22 830 PICT0016.TMP 1997-11-21 17:09 1,666 PICT0017.PIC 1996-09-27 11:47 1,090 PICT0018.PIC 1997-11-20 13:54 726 PICT0019.PIC 1996-09-27 11:48 1,088 PICT0020.PIC 1998-01-09 17:24 1,154 PICT0021.PIC 1998-01-13 16:23 221 REC00000.REC 1996-10-30 08:38 399 SMELD.00L 1997-11-24 11:54 348 SMELD.01L when I open the FUD file with protool v6.0, it shows as the following JPG. Attachment open.JPG (269 Downloads)
rzhsz Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

6/9/2009 8:41 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, I think you already looked at answers of this issue from Manfred and me. And they are not answers that you expect. Again my sugestion is start to build new application... Regards Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on