Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How do upgrade PLC S7-300 from V2.0 to V2.6

Created by: Tranhieu0983 at: 2/14/2012 3:41 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

2/14/2012 3:41 AM	Rate (0)
Tranhieu0983 Bronze Member Joined: 9/24/2010 Last visit: 4/21/2024 Posts: 118 Rating: (10)	Dear Expert and Friend love Automation I have a problem about how can i upgrade my CPU 6ES7 315-2AG10-0AB0 from V2.0.8 to V2.6 Because i can use TIA Portal V2.0.8 of my CPU, and i know that, if i want to use TIA Portal hardware for CPU is V2.6 I know CPU 6ES7 315-2AG10-0AB0 V2.0 can be upgrade to V2.6 Can you help me in this situation. Thank you so much :)
	Mechatronic Center Website: www.plcvietnam.com.vn Email : tvhieu.plc@gmail.com
Suggestion To thank Quote Answer

2/14/2012 5:59 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	New Firmware Version V2.6 for S7-300 CPUs

Suggestion To thank Quote Answer

2/14/2012 7:08 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Sorry to say that, but for such upgrade you would need large MMC (2 or 4Mbytes, don't remember for sure) and PG device. Then you upload FW 2.6 from this site, copy it to MMC via PG integrated port, then insert MMC in CPU and wait for 10 minutes approximately - FW would be rewritten from MMC to CPU.
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tranhieu0983

2/14/2012 9:16 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	But you can allways make online update . Operating System Updates for CPU 315-2DP
	Best regards, Darius
Suggestion To thank Quote Answer

2/14/2012 3:58 PM	Rate (0)
Aret Posts: 2348 Rating: (264)	Darius, im afraid you're wrong in this particular case. One of requirements for online update is: The module in the station whose firmware is to be updated must have firmware version V2.6.1 or higher and be accessible online. And we have 2.0 here.
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Darius

2/15/2012 7:33 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Thanks for corrections. Didn't noticed that.
	Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on