Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to create clients in IEC61850 System Configurator in Digsi 4?

Created by: hoyolachadid at: 5/16/2022 5:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/16/2022 5:19 PM	Rate (0)
hoyolachadid Member Joined: 11/13/2018 Last visit: 8/29/2024 Posts: 2 Rating: (0)	good morning, could you explain me how to create clients in IEC61850 System Configurator in Digsi 4. Two sicam pas clients. Thanks ------------------------------------------------------------------------------------------ Split from Adding an existing relay to new PAS system , correct method.
	Last edited by: Jen_Moderator at: 05/17/2022 06:26:39 New subject after splitting
Suggestion To thank Quote Answer

5/17/2022 7:03 AM	Rate (0)
Mike J Platinum Expert Joined: 10/9/2007 Last visit: 10/4/2024 Posts: 1250 Rating: (115)	hi just add the corresponding ICD file to the project. the files are available on the installation path of IEC61850 Station then you must create static report and for each report/instance you associate one client
	Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer

5/17/2022 4:45 PM	Rate (0)
hoyolachadid Member Joined: 11/13/2018 Last visit: 8/29/2024 Posts: 2 Rating: (0)	Thank you for your answer, in my DIGSI folder I only see the SNTP server as .ICD, I don't have more .ICD files. Could you send me to download PAS CLIENT .ICD. Thank you very much

Suggestion To thank Quote Answer

6/5/2022 9:24 AM	Rate (0)
Unsane Regular Member Joined: 10/11/2017 Last visit: 4/16/2024 Posts: 17 Rating: (1)	Hi IEC 61850 client sample ICD for DIGSI IEC Configurator Find it attached! Attachment ED1_Client.zip (564 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

IEC61850

Follow us on