How to Download program to slave PLC from Master PLC?

Hai...

Give some instruction about S7 routing ..

How to Download program to slave PLC from Master PLC????

Thanks&Regards

HSMIPLC

------------------------------------------------------------------------------------------
Split from S7 Ethernet Routing.

Hello,

please specify what you mean.

A PLC can't be make a download to a Slave PLC!
You can download the Slave PLC trough the Master PLC from the engineering station, but for a halp you must provide more informations:

Which SW do you use?
Which PLC with which FW Version do you use?
How the PLC's and the engineering Stations connected?

Regards

Christoph

Dear,

please to attach screen shot to your HW.

I have attached an example form my own project

you can open HW configuration and press in download then pop up window will ask for which node you need to download as my example my PLC is connected to Ethernet

please feedback if you need more clarification 

Hiiiii..

Software : Simatic S7 V5.5

Master PLC - 319-3PN/DP

Slave PLCs - 317-2DP , 315-2DP

connected through - Profibus

Regards

hsmiplc

Hii...Dear

Please find the attachment of my configuration

Regards

hsmiplc

Hello,

in netpro insert a PG/PC and ad it on the net with which you go online to the CPU319.

Then configure the Networkinterface (Assign) which you use to go online to the CPU319.

The checkbox in the PG/PC Settings should be enabled, then the connection from PG to Network is clored yellow and the Routing is configured.

Download now the Netpro configuration to the CPU319 and go online to the other PLC's.

Regards

Christoph