Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to install simatic step 7 v11 sp1 on windows 7 64 bit

Created by: amitg at: 1/14/2012 8:07 PM (13 Replies)

Rating (3)

Thanks 2

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

5/13/2013 11:51 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 5/31/2023 Posts: 13344 Rating: (2182)	IvanChavez Hi Umencho, Please, can you explain, what tricks i have to do, to install s7b v11 sp2. I have the same problem, i cant install my step 7 v11 sp1 in my Win8 64 bits. Sorry my english, and thanks for ur help. Best regards V11 SP1 will not run on 64 bit windows. Please check the compatibility guide for details on what will install on W8.
	science guy
Suggestion To thank Quote Answer

8/13/2013 10:20 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 5/21/2023 Posts: 1498 Rating: (217)	UMENCHO Basically with some extra fixs you can do the trick - install SP2 like a separate program. I think already explained how to do it. But maybe in German spoken forum... Best regards, Hristo Mihalev Hello UMENCHO, Can you share the URL of that German thread?
	Like it? Rate it!
Suggestion To thank Quote Answer

8/7/2015 3:33 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4812 Rating: (123)	New question published by AutoGen_292066 is split to a separate thread with the subject Simatic Step 7 basic v11 sp2 reports an error with the msi after reboot. Best regards Min_Moderator

Suggestion To thank Quote Answer

8/25/2015 2:05 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4812 Rating: (123)	New question published by mordab is split to a separate thread with the subject TIA Portal V13, can't upload from PLC 1200 with V11 program. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on