Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

¿how to make a crono?

Created by: carloschanc at: 11/4/2013 2:09 PM (6 Replies)

Rating (0)

Thanks 1

7 Entries

11/4/2013 2:09 PM	Rate (0)
carloschanc Posts: 107 Rating: (2)	i want tomeasurea machine stop time. How i can do that? by script or how? Best regards
carloschanc Posts: 107 Rating: (2)
Suggestion To thank Quote Answer

11/5/2013 9:27 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, you can make an alarm when your machine stops and activate duration in alarm text blocks, so you will see how long alarm is pending K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users carloschanc

11/5/2013 1:48 PM	Rate (0)
carloschanc Posts: 107 Rating: (2)	i dont know how to do that Do you have a tutorial? Best regards
carloschanc Posts: 107 Rating: (2)
Suggestion To thank Quote Answer

11/6/2013 9:53 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, which software do you use? basic / comfort / advanced / professional? V11/V12? K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

11/7/2013 8:10 AM	Rate (0)
carloschanc Posts: 107 Rating: (2)	I use a confort v11. But i will buy the comfort v12. have i to buy the professional?
carloschanc Posts: 107 Rating: (2)
Suggestion To thank Quote Answer

11/7/2013 4:19 PM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, the software you have to buy depends on the target system you use. if you use wincc to makeprojects for panels, comfort is fine. if you have a computer system as target system you need advanced or professional to configure the runtime advanced/professional, which is on the computer. the alarm text blocks are only available for runtime professional, not for comfort panels. but thereis also the possibility tosolve your problemwithout this alarmtext blocks. Think the easiest way is touse a plc.i suggest you have a bit which says machine stops...when bitis 1you can start a timer in plc and stop when bit is 0 again. K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

2/7/2014 1:34 PM	Rate (0)
carloschanc Posts: 107 Rating: (2)	i already know the mistake. The evaluation key of updd driver is out of service. But siemens should sell me a hmi with updd driver complete i think.
carloschanc Posts: 107 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Alarms Messages

Follow us on