Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to make a variable LED?

Created by: domenico2020 at: 9/6/2022 8:21 PM (4 Replies)

Rating (0)

Thanks 2

5 Entries

9/6/2022 8:21 PM	Rate (0)
domenico2020 Regular Member Joined: 1/10/2020 Last visit: 10/12/2024 Posts: 25 Rating: (0)	hi, can anyone tell me how to make a variable LED? thank you ------------------------------------------------------------------------------------------ Split from Function keys LED lights. Attachment led pannello.PNG (123 Downloads)
	Last edited by: The Helping Hand at: 09/07/2022 11:16:29 New subject after splitting
Suggestion To thank Quote Answer

9/7/2022 9:13 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/18/2024 Posts: 3120 Rating: (516)	Hello domenico, LED tag can only be set in Global Screen (pagina globale). Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users domenico2020

9/7/2022 2:06 PM	Rate (0)
domenico2020 Regular Member Joined: 1/10/2020 Last visit: 10/12/2024 Posts: 25 Rating: (0)	hi, thanks, i opened the global page, and created a bool variable, but it gives me error when i insert it, it says it's not compatible, can you help me on how to create the variable? thank you Attachment Cattura.PNG (112 Downloads)

Suggestion To thank Quote Answer

9/7/2022 3:36 PM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/18/2024 Posts: 3120 Rating: (516)	Hello domenico, you have to use e.g. INT or WORD tag. On the right of the selection-field for the tag you find a field to set the bit you are going to use for controlling the LED. There are four buttons, each with LED, and you use one tag for all. Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users domenico2020

9/7/2022 7:24 PM	Rate (0)
domenico2020 Regular Member Joined: 1/10/2020 Last visit: 10/12/2024 Posts: 25 Rating: (0)	Prof. Frink Hello domenico, you have to use e.g. INT or WORD tag. On the right of the selection-field for the tag you find a field to set the bit you are going to use for controlling the LED. There are four buttons, each with LED, and you use one tag for all. Regards, Frink THANK YOU SO MUCH, I'M SUCCESSFUL

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on