Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to open block which is "KNOW_HOW_PROTECT"

Created by: Sydney at: 3/27/2009 3:41 PM (11 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

3/27/2009 3:54 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 9/2/2024 Posts: 703 Rating: (96)	Hello, the protection is there to forbid access so you're even not allowed to unlock this blocks. If somebody use K_H_P and anybody else unlock it, why it wouldbe there? So don't ask this. Regards Sydney BTW: will you go to Microsoft site asking for unlocking the MS office files?

Suggestion To thank Quote Answer

3/27/2009 5:24 PM	Rate (1)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 9/9/2024 Posts: 4515 Rating: (839)	Hello Taglover, Normally programmers have many ways to protect their software from unauthorized access. So one of these ways is to block the blocks using KNOW_HOW_PROTECT technique. May be you need tounblock the protected blocks again to add, delete or modify something. In the Simatic manager, under S7-program/Sources. Open the block you want to un-block. You will see the following statement in the third line " KNOW_HOW_PROTECT" Erase it! Then compile and close the block. Go to blocks. Now you will found the block "unblocked". Sometimes, programmers erase the source from the submitted software. So, you can not unblock the block and in this case you should call him for sending unblocked version of the software or at lease a version with souces. With best regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

3/28/2009 5:41 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/10/2024 Posts: 10228 Rating: (1181)	Hello, I don't know, why you asked here this question. Just to add opinion to Sydney and Ayman. Of cource both of them are right. Everybody knows, in this world nothing is imposible. So if you try to search in other place maybe you'll find illegal way to open know_how_protect block.(somebody's job ). In the other way this is not correct (not allow, not legal) to ask in "open media" this question. Best regards

Suggestion To thank Quote Answer

3/30/2009 6:36 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	hi all i wanted to open a block that has been protected by my ex senior but now if i contact him he is not telling the source code SO THAT WHY ASKED THIS QUESTION NO HARD FEELING
	Jazz
Suggestion To thank Quote Answer

3/30/2009 8:29 AM	Rate (0)
Ltmon Posts: 86 Rating: (5)	Hello Tagolover, I'm sure for some users it would be good to know how a block can be opend. But don't forget that the blocksin the Step7 libraries arecreated with this attribut and it's not allowed to open these protected blocks. Monty
Ltmon Posts: 86 Rating: (5)
Suggestion To thank Quote Answer

3/30/2009 6:53 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hi Tagolover, Is it STL or SCL blocks you are trying to open? Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

3/31/2009 8:17 AM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (172)	Opening protected blocks is not legal. Even Siemens - which surely have a possibility to unlock those blocks - won't do it as they are not allowed to. If your ex senior doesn't give you the sources he might have his reasons for it. Either you sue him or you go and talk to him, why he doesn't want to give you the sources. This is the best way. Nothing personal, but nobody here knows if the story is true, maybe it is a fake. This is why the guys don't want to help you in this case.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

4/1/2009 6:38 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	thank you to all well ihave another question ???? If i have protected a self made block with a KNOW_HOW_PROTECT code then is it possible to open those block. I have created the blcok code by STL . Even if you do not have the source code ... i have heard that it is possible to remove the protection for the blocks IS THERE ANY OTHER WAY OF PROTECTING THE BLOCK , SO THAT NO ONE CAN OPEN IT
	Jazz
Suggestion To thank Quote Answer

4/1/2009 6:40 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	hi phantom actually ihave created the protection by STL
	Jazz
Suggestion To thank Quote Answer

4/1/2009 6:46 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	hi all when i create the source code for the block in STL , a folder gets created for the code inside the program folder "s7asrcom" --- > inside this folder a folder name 000000001 gets created , will it be possible to do any thing that can open the protected block with the files inside the folder mentioned please help as i am doing blocks for a project. and i do not want any one except me to open the block by any means
	Jazz
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on