Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to Replace M-pcode

Created by: samiraj at: 8/14/2013 2:42 PM (5 Replies)

Rating (0)

Thanks 3

6 Entries

8/14/2013 2:42 PM	Rate (0)
samiraj Experienced Member Joined: 10/13/2012 Last visit: 10/24/2024 Posts: 79 Rating: (0)	thank you, and how to Replace M-pcode , we are using for Ex head Clamp =M50 clamp by hydraulic valve head declamp =M51 i would like to replace from M50 to M60 like that then how to edit please guide by samiraj
	Last edited by: CS Moderator at: 8/15/2013 2:53 PM new subject after splitting from /tf/WW/en/Posts/87766#top
Suggestion To thank Quote Answer

8/14/2013 3:21 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Can you give us a piece of that code(screenshotor pdf), it's not clear to me what you mean. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users samiraj

8/15/2013 10:45 AM	Rate (0)
samiraj Experienced Member Joined: 10/13/2012 Last visit: 10/24/2024 Posts: 79 Rating: (0)	how to Replace M-code or create new Mcode , we are using for Ex head Clamp =M50 clamp by using hydraulic valve head unclamp =M51 unclamp by using hydraulic valve i would like to replace from M50 to M60 like that or i want create New M-code like this i have attached plc file , how to edit please guide me its 840d and step7 plc by samiraj Attachment plc.zip (69 Downloads)
	Last edited by: samiraj at: 8/15/2013 11:01 AM
Suggestion To thank Quote Answer

8/15/2013 10:59 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Sorry, you forgot to tell it's about Sinumeric I don't have that option installed here. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users samiraj

8/15/2013 4:13 PM	Rate (0)
APC Tech Team Posts: 391 Rating: (50)	samiraj how to Replace M-code or create new Mcode , we are using for Ex head Clamp =M50 clamp by using hydraulic valve head unclamp =M51 unclamp by using hydraulic valve i would like to replace from M50 to M60 like that or i want create New M-code like this i have attached plc file , how to edit please guide me its 840d and step7 plc by samiraj take a look at FC46 Network 1 U "Chan1".MDyn[50]// change the number in the brackets // UN "M15.1" S "M43.0" U "Chan1".MDyn[51] // UN "M15.1" S "M43.1" "Chan1".MDyn[50] -> DB21.DBX200.2 -> M50
APC Tech Team Posts: 391 Rating: (50)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users samiraj

8/15/2013 4:39 PM	Rate (0)
samiraj Experienced Member Joined: 10/13/2012 Last visit: 10/24/2024 Posts: 79 Rating: (0)	thank youAPC Tech Team

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on