Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to use 8 CH AI Hart Module in Redundant Mode

Created by: dna at: 10/8/2007 7:02 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/8/2007 7:02 PM	Rate (0)
dna Posts: 2 Rating: (0)	Dear Late We have configured S7414-H system with DI , DO , AO redundancy succesfully , still struggling to handle 8 CH AI Hart Module. It is configured as 4 wire con and in Redundant Mode. The lower address is read in the user program.If we try to simulate redundancy by plugging out the Front connector of lower address channel.The Higher addressed Redundant Input does not take over and transfer its value in the user program. Can you sujjest a solution Thanks in advance DnA
dna Posts: 2 Rating: (0)
Suggestion To thank

10/15/2007 12:15 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/14/2024 Posts: 4113 Rating: (195)	closed cause question posted twice The second thread with the subject Analog Input Connection in S7-400H to Redundant 8CH AI 331-7TF Hart Moduleis published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on