Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to use the command "S7tgtopx.exe"

Created by: a09002412 at: 9/29/2007 3:38 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/29/2007 3:38 AM	Rate (0)
a09002412 Posts: 1 Rating: (0)	Dear everyone: i sawa command in cimplicity to link simatic s7 ""C:\Program Files\Siemens\Step7\S7BIN\S7tgtopx.exe" /e "C:\Program Files\Siemens\Step7\S7Proj\514_3\LYG3#RTG.s7p" /o "1,8:LYG3#RTG\SIMATIC 300(1)\CPU 315-2 DP\S7 Program(5)\Blocks" /h T00112001;151;T00000000;0;T00116001;11" i do not understand /h T00112001;151;T00000000;0;T00116001;11 what's this mean? i found it in the help of S7 ,it said objectID, what's mean of objectID? who can explain it detail. thx!!!
a09002412 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/4/2007 12:31 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 6/15/2023 Posts: 1909 Rating: (132)	Hello, regarding to your inquiry we would like to inform you. In refer to the error message we recommend: Please check the system time of your PC (system adjustments). It is possible, that the system time is adjusted in the future. Make a copy of your project with "Save as" together with the option "With Reorganization (slowly)", it is possible, that your project is destroyed. Have you also other error message, example "Internal OLE Error" (256:26)? In this case see the FAQ http://support.automation.siemens.com/WW/view/de/10208766 Further information you will find in the FAQ http://support.automation.siemens.com/WW/view/de/26595826 We hope we could help you. With best regards Cicero

Suggestion To thank Quote Answer

10/4/2007 1:18 PM	Rate (0)
Remark Bronze Member Joined: 9/1/2006 Last visit: 8/28/2023 Posts: 192 Rating: (13)	Hi, Did you have a look at this FAQ http://support.automation.siemens.com/WW/view/de/11514867 may be that explains your question regards, René

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on