Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

HSP Simatic softcontroller

Created by: DavidBrown at: 10/21/2021 2:43 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/21/2021 2:43 PM	Rate (0)
DavidBrown Gold Member Joined: 6/29/2012 Last visit: 12/25/2023 Posts: 975 Rating: (9)	I have TIA V16 update4, and I have a software controller CPU1505SP TF with firmware 21.9. I updated the hardware catalog of TIA today with latest HSP. But the highest firmware for the softcontroller I can find in my catalog is 21.8. Is fw 21.9 available for the catalog in TIA?

Suggestion To thank Quote Answer

10/21/2021 2:54 PM	Rate (0)
Hisan22 Bronze Member Joined: 3/2/2016 Last visit: 5/29/2024 Posts: 72 Rating: (14)	Hi DavidBrown, Firmware V21.9 is only available for TIA Portal V17.
	Last edited by: Hisan22 at: 10/21/2021 14:54:39
Suggestion To thank Quote Answer

10/21/2021 3:36 PM	Rate (0)
DavidBrown Gold Member Joined: 6/29/2012 Last visit: 12/25/2023 Posts: 975 Rating: (9)	If on the softwarecontroller already v21.9 is installed, I cannot go back to a lower version (v21.8). Is it possible to format the memory card of the softcontroller (I suppose NTFS??) to restart from zero? If so, is a special card reader needed, or just a standard commercial? Thanks

Suggestion To thank Quote Answer

10/22/2021 5:23 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 9/20/2024 Posts: 22365 Rating: (3011)	Hi, why not create a project wit PLC Version 2.18 and download it to 2.19? This normally work without problems. You can also wipe the entiere ASW Controller and rebuild it with a 2.18 Image (if you have one). But is not need . For the CF Memory Card you need a CFast USB Card reader.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on