Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

i can't connected with s120 (starter V5.3.0.3 )

Created by: aitoufkir at: 9/19/2020 1:50 PM (20 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2 | 3; |

21 Entries

Entries per page: 10 | 20 | all

9/29/2020 6:33 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	click on the button accessible devices/nodes in Starter menubar you know which one you do it in screen 4 of your zip ;)

Suggestion To thank Quote Answer

9/30/2020 11:20 AM	Rate (0)
aitoufkir Posts: 12 Rating: (0)	i search in network for the address but i don't get anything ( see the attachment ) Attachment test.JPG (329 Downloads)
aitoufkir Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

9/30/2020 11:23 AM	Rate (0)
aitoufkir Posts: 12 Rating: (0)	yes i do it but with any result :( !!! and i try with PC Adapter S7972-0cb20-0xa0 The same result does not connect :(
aitoufkir Posts: 12 Rating: (0)	Last edited by: aitoufkir at: 09/30/2020 11:26:48
Suggestion To thank Quote Answer

9/30/2020 11:29 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	if you use a MPI/DP Adapter then you will never find a Ethernet device with it, ans sorry no plan from which tool you make the screen, but is not accessible devices or something like that.

Suggestion To thank Quote Answer

9/30/2020 11:55 AM	Rate (0)
aitoufkir Posts: 12 Rating: (0)	Perhaps you did not understand what I said I used MPI because method to connected with ethernet did not work. I said to try another method and despite that it did not work
aitoufkir Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

9/30/2020 12:01 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	have you activate the option "only master om the bus" for the DP Adapter. i understand well what you write, but you switch to often betwenn the things you do and give answers to questions, and this is why is so hard to give some valueable help. but ok, i have no problem with this, the problem have you

Suggestion To thank Quote Answer

10/20/2020 3:18 PM	Rate (0)
aitoufkir Posts: 12 Rating: (0)	i do it but with any result !! i need help plz
aitoufkir Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

10/20/2020 3:40 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	without any valuable help is not possible is the cu booted up correctly? which LED on on the CU? project loaded on cu or not?

Suggestion To thank Quote Answer

10/20/2020 4:46 PM	Rate (0)
aitoufkir Posts: 12 Rating: (0)	is the cu booted up correctly? which LED on on the CU? => How can i booted correctly ? +led Together in red project loaded on cu or not? => it is new CU ( empty )
aitoufkir Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

10/20/2020 7:32 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	no answer to the questions. ok good luckk to solve your problem notice! is your problem, not the problem of me or somebody else!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on