i need from hmi when i touch the switch,to on-of one output

AutoGen_667937

hello

i have one s7 1200

6ES7211-1AE31-0XB0 + 6ES7232-4HA30-0XB0 +altivar 12 siemens touch 4 inch mono tia v12 trial

,i write small programm for digital,is not problem wher i use hardware switch

but

1-on hmi i put some touch on-off soft,i connected tag,but when i run plc,not work,practicaly,i need from hmi when i touch the switch,to on-of one output

[schnippschnapp]

i am in italy,and i talked this week more times with siemens office milano,italy,,they told me ,,i call you back,but nothing,they not respond

thanks

AutoGen_667937

hello sir

i need to command from touch screen ,my output from plc

i finded in librery mnore buton with on-off,i linked with tag from plc,but not work

also,i put the lamps on out for see when is changed,but not work

strange because,i hace the switch hw in my elec panel,and work,so i miss something ,one link,but where

for analog,in and out

for in i finded something,the pid compact which can give me one variablebar on my hmi,but i need to copy or comand other bar for out analog,and i need to know the modul

i saw in siemens help,i can do this with pid compact,or normalize+scale

i need for varied level of tension or corrent,ma,to have varied alarms,and command for digital out

my sir,i have the web page 192.168.0.1,i can see,is ok

i tried to understand,the plc have the possibility to have web adress,for acces from internet directly?how?

finally,i need to connect varied inverter ion my system

i forget to say,i have one switch 1gb,tp-link

please can you help me?

thank you

1. select the button and go to event section in its properties.Select "switch on" then add set bit function and a tag assign to this function.(see pic#1)
   
2. add tag "tag_7" as output Q0.0(see pic#2)
3. Same issue for "switch off" button and same procedure to selet same tag((see pic#3)
4. define connection between PLC and HMI and compile(see pic#4)
5. online test
   

AutoGen_667937

hello

i have one s7 1200

6ES7211-1AE31-0XB0 + 6ES7232-4HA30-0XB0 +altivar 12 siemens touch 4 inch mono tia v12 trial

,i write small programm for digital,is not problem wher i use hardware switch

but

1-on hmi i put some touch on-off soft,i connected tag,but when i run plc,not work,practicaly,i need from hmi when i touch the switch,to on-of one output

[schnippschnapp]

i am in italy,and i talked this week more times with siemens office milano,italy,,they told me ,,i call you back,but nothing,they not respond

thanks

AutoGen_667937

cable lan,plc-switch(tp-link 1gb)-hmi-computer

when i go in networking devices,i can see,plc communicate using profinet with hmi,i have connection

i can go online,fo test my hw switch PHYSICALand work ,i can on-off all out,Q0..Q4,using I0.0....I0.5,

i connected and write event,for modify bit,in hmi,each button on-off, i put bit for on and reset for off

when i dont have connection between plc and hmi,from hmi the button,remain on but when i connect with plc,no,work just with phisical switch,i cant understand where is something wrong

can you help me?

thanks

AutoGen_667937

cable lan,plc-switch(tp-link 1gb)-hmi-computerwhen i go in networking devices,i can see,plc communicate using profinet with hmi,i have connectioni can go online,fo test my hw switch PHYSICALand work ,i can on-off all out,Q0..Q4,using I0.0....I0.5,i connected and write event,for modify bit,in hmi,each button on-off, i put bit for on and reset for offwhen i dont have connection between plc and hmi,from hmi the button,remain on but when i connect with plc,no,work just with phisical switch,i cant understand where is something wrongcan you help me?thanks

AutoGen_667937

and i have some dubt

but i connected and plc with hmi directly,with cable ln direct or crossover,nothing changed,so.......