image does not run

bergmanu

Hi, 

this is correct. FW 1.2.1 and Example Image V1.2.2 are the latest ones. 

To update the firmware to V1.2.1, you need to use the Example Image V1.1.1, as it is the only version which can be booted with the old and new firmware. 

1. Boot Example Image V1.1.1 from SD card
2. Update firmware to V1.2.1
3. Flash Example Image V1.2.2 to the SD card
4. Boot the IOT2050 with the latest Example Image V1.2.2

After this procedure, you are up-to-date. 

Best regards

Hello, I need help, I have an iot2050 advanced FS01 with firmware 1.0.0, when I use image 1.0.2 the operating system runs correctly, but when I use image 1.1.1 the image does not run.

------------------------------------------------------------------------------------------
Split from Firmware Update to use Example Image as of V1.2.1 and Industrial OS as of V3.2.2.

Luis0488

 

bergmanu

Hi, 

this is correct. FW 1.2.1 and Example Image V1.2.2 are the latest ones. 

To update the firmware to V1.2.1, you need to use the Example Image V1.1.1, as it is the only version which can be booted with the old and new firmware. 

1. Boot Example Image V1.1.1 from SD card
2. Update firmware to V1.2.1
3. Flash Example Image V1.2.2 to the SD card
4. Boot the IOT2050 with the latest Example Image V1.2.2

After this procedure, you are up-to-date. 

Best regards

 

Hello, I need help, I have an iot2050 advanced FS01 with firmware 1.0.0, when I use image 1.0.2 the operating system runs correctly, but when I use image 1.1.1 the image does not run.

Please don't post twice for the same problem ... 

Closed cause question posted twice.

The second thread with the subject My iot2050 advanced FS01 does not boot example image 1.1.1 is published within the conference IOT2050.