Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Implement a S7 Automation Processor within a S5 DCS

Created by: AthosZA at: 4/8/2014 3:54 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/8/2014 3:54 PM	Rate (0)
AthosZA Posts: 1 Rating: (0)	Hi guys, I appologise for bumping an old thread. I am currently facing a similar issue to what was discussed above. I need to know whether it is possible to implement a S7 Automation Processor within a S5 DCS (S5 automation processors and T2000 HMI). So essentially the S7 automation processor would just be one of the automation processors in the T2000 DCS architecture. Any help will be appreciated.
AthosZA Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 4/10/2014 2:56 PM new subject after splitting from /tf/WW/en/Posts/18214#top
Suggestion To thank Quote Answer

3/27/2015 7:59 AM	Rate (0)
irkhaju Posts: 11 Rating: (2)	yes possible. you should upgrade the sppa T2000 to version 8 with S7 processor as automation system
irkhaju Posts: 11 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on