Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Incremental to Absolute Changing

Created by: VSR at: 6/22/2010 9:37 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/22/2010 9:37 AM	Rate (0)
VSR Posts: 7 Rating: (0)	Hello.... I have incermental motor in the machine. we need to change absolute.... does it is possible? VSR
VSR Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/22/2010 9:43 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... Yes it is possible you can change.... but additional following changes required. > Encoder alignment to be done for the absolute >Encoder Cable==> absolute type > Internal encoder cable (Black colour) which coming from the motor toround type connector. > Changes to be made in Drive MD(configuration) and Axis MD (ENC_Type)of that particular motor. check it out..... Ekalavya
Ekalavya Posts: 2964 Rating: (484)	Last edited by: Ekalavya at: 6/22/2010 10:08 AM
Suggestion To thank Quote Answer

6/22/2010 9:46 AM	Rate (0)
VSR Posts: 7 Rating: (0)	Thanks for your reply... iwill check it out..... VSR
VSR Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on