10/6/2015 12:54 PM | |
Joined: 1/28/2009 Last visit: 5/20/2024 Posts: 6840 Rating: (1359) |
Hello ,
SIMATIC S7-300 use same floating-point standards as Rockwell software products like control-logix5000. For conversion in SIMATIC side, you should only know how the bytes are split.Just tell us for the attached file , what was the original floating-point value.Read more HERE. I hope this helps, hdhosseini |
10/6/2015 2:44 PM | |
Joined: 4/28/2015 Last visit: 3/31/2021 Posts: 13 Rating: (0) |
Thank you . This works. Please let me know if there is concise way to do it |
10/6/2015 3:27 PM | |
Joined: 4/28/2015 Last visit: 3/31/2021 Posts: 13 Rating: (0) |
Thank you very much .. This also works.. |
This contribution was helpful to1 thankful Users |
10/16/2015 2:18 PM | |
Joined: 4/28/2015 Last visit: 3/31/2021 Posts: 13 Rating: (0) |
i got the answer i just reversed what we did in Reading Real to 4 bytes |