Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

insert symbol

Created by: muffi at: 7/3/2013 8:31 PM (15 Replies)

Rating (1)

Thanks 3

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

7/3/2013 8:31 PM	Rate (0)
muffi Posts: 95 Rating: (10)	hi I upload program from PLC S7 400H on my pc how can i insert symbols to uploaded program from another program that has symbols?
muffi Posts: 95 Rating: (10)
Suggestion To thank Quote Answer

7/3/2013 8:32 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	Copy the "Symbol" list from your old project into the new one.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

7/3/2013 10:11 PM	Rate (0)
Avinashkrishna Posts: 62 Rating: (4)	Dear Friend, First Delete the Symbol file in the uploaded Project &Copy the Old Project Symbol file and Paste in Uploaded File. Regards, Avinashkrishna
Avinashkrishna Posts: 62 Rating: (4)
Suggestion To thank Quote Answer

7/4/2013 5:55 AM	Rate (0)
daad Silver Member Joined: 10/31/2011 Last visit: 11/12/2024 Posts: 400 Rating: (5)	Dear Muffi, After replacing new symbal table you also have to recompile whole project.. Thanks

Suggestion To thank Quote Answer

7/4/2013 6:04 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	Hello, Besides what have been mentioned by friends, there are some issues that are not recoverable and you need a original copy of program: Internal symbols and comments for interfaces in function blocks and functions User comments,logic description and history and process of logic development complex structure such as UDTs are not recoverable These are cases, I have noticed.There may be other issues that you can check just by comparing.online/original project. Best regards Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users playerslight Saravana kumar muffi

7/4/2013 6:34 AM	Rate (0)
@shish Bronze Member Joined: 9/16/2011 Last visit: 6/20/2024 Posts: 291 Rating: (6)	Dear Muffi, It is important to note here that in case of siemens we can only upload the complete logic/program from the PLC but not the symbols, comments and description & name of FCs, FBs DBs. For these, you must have old backup otherwise you need to name each and every thing ! Reg, Ashish
	Reg, @shish --- If satisfied with reply, Rate it ! If problem solved, hit THANK !
Suggestion To thank Quote Answer

7/4/2013 6:46 AM	Rate (0)
viralpatel Silver Member Joined: 11/18/2010 Last visit: 8/5/2022 Posts: 523 Rating: (32)	muffi hi I upload program from PLC S7 400H on my pc how can i insert symbols to uploaded program from another program that has symbols? Change symbol table from old one ,upload not possible in this case VP

Suggestion To thank Quote Answer

7/4/2013 6:58 AM	Rate (0)
ALGUDKAR RAO Posts: 621 Rating: (10)	muffi hi I upload program from PLC S7 400H on my pc how can i insert symbols to uploaded program from another program that has symbols? If you dont have the drawing means go to online simulate and write the name of address.or if you have the drawing (control diagram) make in excel sheet import them.
ALGUDKAR RAO Posts: 621 Rating: (10)
Suggestion To thank Quote Answer

7/11/2013 12:39 PM	Rate (0)
muffi Posts: 95 Rating: (10)	hi I make new program and insert symbol to this but some address get same symbol and some don't have any symbol what is problem?
muffi Posts: 95 Rating: (10)
Suggestion To thank Quote Answer

7/11/2013 12:45 PM	Rate (0)
@shish Bronze Member Joined: 9/16/2011 Last visit: 6/20/2024 Posts: 291 Rating: (6)	Dear muffi, You need to upload the program here. Reg, Ashish
	Reg, @shish --- If satisfied with reply, Rate it ! If problem solved, hit THANK !
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on